Welcome to the Bestway SaluSpa manual! This guide provides essential information for safe installation, operation, and maintenance of your inflatable spa. Ensure a relaxing experience by following the instructions carefully.
Safety Precautions and Warnings
Ensure a safe and enjoyable experience with your Bestway SaluSpa by adhering to these precautions. Always supervise children when the spa is in use. The maximum water temperature should not exceed 104°F (40°C). Install the spa on a smooth, flat, and level surface capable of supporting the weight; Avoid exposure to direct sunlight for extended periods. Follow electrical safety guidelines and keep the spa away from water sources. Do not use the spa if you have certain medical conditions without consulting a doctor. Regularly test and maintain proper chemical levels to ensure clean and safe water. Read the manual thoroughly before setup and operation.
- Never leave children unsupervised near the spa.
- Avoid using the spa during extreme weather conditions.
- Ensure the GFCI (Ground Fault Circuit Interrupter) is tested before use.
- Do not submerge electrical components in water.
For any issues or concerns, contact Bestway’s customer service for assistance.
Setting Up Your Bestway SaluSpa
Set up your Bestway SaluSpa on a smooth, flat surface. Inflate using the pump, then connect electrical components securely. Follow manual instructions for proper assembly.
3.1. Preparing the Site
Before setting up your Bestway SaluSpa, ensure the site is smooth, flat, and level. Choose a surface that can support the combined weight of the spa, water, and users. Avoid uneven or soft surfaces, such as grass without a protective cover. Clear the area of obstacles and ensure proper drainage. For indoor use, install near a floor drain to manage water and humidity. Avoid direct sunlight exposure for extended periods to prevent overheating. Always follow the manual’s guidelines for a safe and stable setup. Proper site preparation ensures optimal performance and longevity of your Bestway SaluSpa.
3.2. Inflating the Spa
To inflate your Bestway SaluSpa, locate the inflation valve on the spa floor. Attach the inflation hose to the valve and connect it to the pump unit. Turn on the pump and monitor the pressure gauge to ensure it reaches the recommended level. Avoid over-inflation, as this may damage the spa. If using an external pump, follow the manufacturer’s instructions. Once fully inflated, tighten the valve securely. Always inflate on a flat, stable surface to maintain shape and structural integrity. Proper inflation is crucial for the spa’s performance and safety. Refer to the manual for specific pressure guidelines.
3.3. Connecting Electrical Components
Before connecting electrical components, ensure all parts are unpacked and undamaged. Locate the control panel, pump, and heater. Connect the pump to the control panel using the provided cables, ensuring secure connections. Plug the control panel into a grounded GFCI outlet, as specified in the manual. Avoid using extension cords to prevent electrical hazards. Once connected, test the system by turning on the power and checking for proper function. Ensure all components are correctly aligned and secured to avoid water exposure. Follow the manual’s wiring diagram for precise connections. Proper electrical setup is crucial for safe and efficient operation of your Bestway SaluSpa.
Operating the Bestway SaluSpa
Operate your Bestway SaluSpa by using the digital control panel to adjust water temperature and activate jets. Ensure the system is fully heated before use for optimal relaxation.
4.1. Heating the Water
To heat the water in your Bestway SaluSpa, first ensure the spa is filled to the recommended water level. Locate the digital control panel and press the temperature button to set your desired heat level. The system will begin heating the water gradually. Allow sufficient time for the water to reach the set temperature, as this may take several hours depending on ambient conditions. Always monitor the temperature to avoid exceeding the maximum limit of 104°F (40°C). For energy efficiency and safety, avoid leaving the heater on when the spa is not in use or when water levels are low.
4.2. Using the Control Panel
The digital control panel on your Bestway SaluSpa allows you to effortlessly manage various functions. Press the temperature button to adjust the water heat, ensuring it reaches your desired level. Use the jet button to activate or deactivate the massage jets for a soothing experience. The timer function lets you set the heating and jet cycles, optimizing energy use. For added convenience, some models feature a light button to enhance ambiance. Always refer to the manual for specific button functions and troubleshooting. Remember to use the child safety lock to prevent accidental changes. Regularly check and clean the control panel to maintain optimal performance and longevity.
4.3. Activating Jets and Massage Functions
To activate the jets and massage functions on your Bestway SaluSpa, press the jet button on the control panel. This will start the air jets, providing a soothing massage experience. Some models offer multiple massage settings, which can be cycled through using the same button. For timed operation, use the timer function to set a duration for the jets. Ensure the water is at the recommended temperature before activating the jets. Always refer to the manual for specific instructions, as features may vary by model. Proper maintenance of the jet system is essential for optimal performance and longevity of your spa.
Maintaining Your Bestway SaluSpa
Regularly clean the spa, use recommended chemicals for water treatment, and replace the filter cartridge to ensure optimal performance and hygiene. Proper maintenance enhances longevity and safety.
5.1. Cleaning the Spa
Regular cleaning is essential to maintain hygiene and functionality. Use mild detergents and soft cloths to wipe down the spa’s surfaces, avoiding abrasive materials. Clean the filter cartridge regularly and replace it as needed. Check for mold or mildew and treat promptly. After draining, ensure the spa is dry to prevent bacteria growth. For stubborn stains, mix baking soda and water for a gentle scrub. Always follow the manufacturer’s guidelines to avoid damaging the materials. Regular cleaning ensures a safe and enjoyable experience for all users while extending the lifespan of your Bestway SaluSpa.
5.2. Using Chemicals for Water Treatment
Proper water treatment is crucial for maintaining hygiene and safety. Use chlorine or bromine tablets to sanitize the water, ensuring levels remain between 1-3 ppm. Test the pH level regularly, adjusting it to 7.2-7.8 using pH balancers. Always follow the manufacturer’s instructions for chemical dosage. Allow the spa to circulate water after adding chemicals to ensure even distribution. Avoid overuse, as excessive chemicals can irritate skin or damage equipment. Test the water daily and adjust as needed to maintain a safe and comfortable environment. Refer to the manual for specific recommendations on chemical types and usage for your Bestway SaluSpa model.
5.3. Replacing the Filter Cartridge
To maintain optimal water clarity and hygiene, replace the filter cartridge every 1-2 months or as needed. Turn off the pump and unplug the power supply before starting. Locate the filter housing, usually near the pump, and remove the lid. Pull out the old cartridge and inspect it for damage or wear. Install a new cartridge, ensuring it clicks securely into place. Replace the lid tightly to avoid leaks. Dispose of the old cartridge responsibly. Regular filter changes prevent clogging, improve water circulation, and enhance the overall performance of your Bestway SaluSpa. Always use a genuine or compatible replacement cartridge for best results.
Troubleshooting Common Issues
If you encounter issues with your Bestway SaluSpa, refer to this section for solutions. Common problems include the spa not heating, jets not functioning, or the pump failing to turn on. First, ensure the power supply is stable and the GFCI outlet is not tripped. Check all connections for tightness and inspect the filter cartridge for blockages. If the pump doesn’t start, verify the deflation valve is closed. For persistent issues, consult the manual or contact Bestway’s customer support. Regular maintenance, such as cleaning and replacing the filter, can prevent many problems. Always follow safety guidelines to avoid further complications.
Deflating and Storing the Bestway SaluSpa
To deflate your Bestway SaluSpa, locate the deflation valve and unscrew it to release air. For faster deflation, attach the inflation hose to the valve and connect it to the pump unit. Once fully deflated, drain all water and clean the spa thoroughly. Store the spa in a dry, cool place, away from direct sunlight to prevent damage. Use the provided storage cover to protect it from dust and moisture. Ensure all electrical components and accessories are stored separately to maintain their condition. Proper storage will extend the lifespan of your SaluSpa and ensure it remains ready for future use.
Accessories and Included Items
Your Bestway SaluSpa comes with essential accessories to enhance your experience. These include a filter cartridge, chemical floater, repair kit, and storage cover. The filter cartridge ensures clean water, while the floater helps maintain chemical levels. The repair kit allows for quick fixes, and the cover protects the spa when not in use. Additional items like the control panel and pump unit are also provided for seamless operation. Ensure all components are accounted for and properly installed to maximize functionality and longevity. Refer to the manual for details on each item’s purpose and usage to get the most out of your SaluSpa.
Indoor Installation Considerations
Installing your Bestway SaluSpa indoors requires careful planning to ensure safety and functionality. First, choose a spacious, well-ventilated area with a sturdy floor capable of supporting the spa’s weight when filled. Proper ventilation is crucial to prevent humidity buildup, which can lead to mold and mildew. Consider installing a ventilation system or using a dehumidifier to maintain dry air. Ensure the spa is placed near a floor drain or have a plan for safe water drainage to avoid flooding. Check that electrical outlets can handle the spa’s power requirements, possibly needing a dedicated circuit. Protect the spa from freezing temperatures, especially in colder climates, using the Freeze Shield system as per the manual. Regularly inspect and maintain the spa’s components, such as the filter cartridge, to keep it clean and functional. By addressing these considerations, you can enjoy a relaxing indoor spa experience year-round.
Using the Freeze Shield System
The Freeze Shield System is designed to protect your Bestway SaluSpa from damage caused by freezing temperatures, allowing year-round use. To activate the system, follow the instructions in the manual for your specific model. Ensure the spa is properly installed and maintained to prevent water from freezing. Regularly inspect the system to ensure it is functioning correctly. Keep the spa surface clear of debris and avoid exposing it to direct sunlight for extended periods. Proper drainage and storage during extreme cold are also recommended. By using the Freeze Shield System effectively, you can enjoy your spa comfortably, even in colder weather conditions.